Removing
1. Loosen and remove the mounting nuts from the air cleaner cover. Unfasten the top cover holders (see fig. 30.1. A. b).
Pic. 30.1, a. Loosen nuts...
Pic. 30.1, b - and unfasten the cover holders.
2. Lift the air cleaner cover, then disconnect the crankcase ventilation hose (where from installed) and remove the air cleaner element (see fig. 30.2).
Pic. 30.2. Remove filter element - carburettor model shown
Installation
3. Install the new filter in the reverse order of removal. Make sure the element is installed correctly, according to the markings on the top surface.