- Park the machine on level ground.
- Turn the steering wheel to the straight ahead position.
- The engine must be off.
Advice. For a correct test, do not turn the steering wheel after the engine has stopped.
Safety first!
If you have to add fluid frequently, this indicates a leak, which must be immediately detected and repaired.
1. The reservoir is an integral part of the power steering pump. Wipe the tank, then unscrew the fastening nut and remove the tank cover.
2. The liquid level must be between the marks maximum (MAX) and minimum (MIN) on a plastic tube, which is installed on the stud of the tank lid.
3. Add the fluid recommended by the manufacturer to the mark "MAX". Do not let dirt enter the reservoir and do not overfill. Close the lid securely.