Note. Separate characteristics are also given in the text of the Chapter and, if they are mandatory, are highlighted in bold.
Characteristics of torque and power of engines depending on the speed
Engine Type
V-shaped, 6-cylinder, water-cooled, SOHC type, timing chain, microprocessor controlled, variable intake manifold |
V-shaped, 8-cylinder, water-cooled, SOHC type, microprocessor-controlled timing chain, variable intake manifold |
V-shaped, 12-cylinder, water-cooled, SOHC type, timing chain drive, microprocessor control, variable intake manifold. 2 turbochargers |
In-line, 6-cylinder, water-cooled, single overhead camshaft (SOHC) and timing chain drive |
V-shaped, 8-cylinder, turbocharged, water-cooled, single overhead camshaft (SOHC) and timing chain drive | Designation//Start of production | S280 M112.922//s 01/99 S320 M112.944//s 10/98 S430 M113.941//s 10/98 S500 M113.960//s 10/98 S55AMG M113.386//s 8/00 S600 M137.970//from 8/99 S320CDI M613.960//from 6/99 S400CDI M628.960//from 6/99 Rated power, kW (at rpm) | S280 150 (5700) S320 165 (5600) S430 205 (5750) S500 225 (5500) S55AMG 368 (6100) S600 368 (5000) S320CDI 150 (4200) S400CDI 184 (4000) Rated torque, Nm (at rpm) | S280 270 (3000-5000) S320 315 (3000-4800) S430 400 (3000-4400) S500 460 (3000-4250) S600 800 (1800-3500) S55AMG 700 (2750-4000) S320CDI 500 (1800-2600) S400CDI 560 (1700-2600) Number of cylinders, arrangement of cylinders (petrol models - 3 valves per cylinder) | S280, S320 6, V-shaped S430, S500, S55AMG 8, V-shaped S600 12, V-shaped S320CDI 6, in a row S400CDI 8, V-shaped Cylinder displacement, cm3 | S280 2799 S320 3199 S430 4266 S500 4966 S55 AMG 5439 S600 5513 S320CDI 3222 S400CDI 3996 Bore x Stroke | S430 89.9 x 84.0 S500 97.0 x 84.0 S55 AMG 97.0 x 92.0 S600 82.0 x 87.0 S320CDI 88.0 x 88.4 S400CDI 86.0 x 86.0 Compression ratio | S430 10.0 S500 10.0 S55 AMG 9.0 S600 9.0 S320CDI 18.0 S400CDI 18.5 Battery 12V, 100 Ah Generator | Voltage, V 14 Maximum current, A 180 (190 on diesel models) Transmission | Type Automatic 722.632 (722.633) Tightening torque of threaded connections, Hm | crankshaft pulley bolt
200 Hm + 90°
325 Hm + 90° Oil plug AT 20 Oil plug of the torque converter AT 16 Pallet bolts AT 8 Tie rod nuts 60 Wheel bolts 150 |