Details of installation of a forward cover of a transmission
92 - Front cover of the gearbox; 92a - Bolt; 93 - Oil seal; 94, 96 - Gaskets; 100 - manual transmission; 150 - Clutch release bearing; 155 - Clutch release lever
Removing
1. Fix the gearbox on the stand.
2. Drain the gearbox oil (approx. 1 7 l).
3. Remove the clutch release bearing (150) and clutch release lever (155).
4. Unscrew the front cover (92).
5. Using a screwdriver, remove the oil seal (93).
Installation
1. Using a suitable mandrel, press in a new oil seal until it stops.
2. Lubricate and install gaskets (94) And (96) in the gearbox cover (02).
3. Further installation is carried out in the reverse order of removal.