Removing
1. Disconnect the negative cable (-) battery with the ignition off. The cabin air filter box must first be removed.
Attention! Before disconnecting the cable, find out the security code of the radio, if any, refer to Section Replacing the battery.
2. Remove the electric motor, refer to the appropriate section.
3. Remove the fixing screws (arrows in the illustration) and remove the electronic adjustment stage (1) electric motor.
4. Disconnect the fan motor connector.
Installation
1. Installation is carried out in the reverse order of removal.
2. Connect ground cable (-) battery with the ignition off. Install the cabin air filter box. If necessary, enter the radio code and set the time on the clock.