Air humidity sensor
Removal
Note: The air humidity sensor is located in the air intake duct.
1. Remove the filter box, refer to Section Replacing the cabin air filter element/carbon air filter.
2. Turn the air humidity sensor (1) counterclockwise vigorously and remove it from the air intake duct (2).
3. Disconnect the sensor connector (3). Make sure that the wire does not slip back into the air conditioner box.
Installation
Installation is performed in the reverse order of removal. The sensor should be clearly fixed.
Multifunctional sensor
Air conditioning with automatic comfort control
The sensor is installed under the water collector, looking in the direction of travel, on the left next to the air intake channel.
Removal
1. Remove the cabin air filter box, refer to Section Replacing the cabin air filter element/carbon air filter.
2. Loosen the screw securing the multifunctional sensor under the water collector and detach the sensor from the holder.
3. Disconnect the sensor connector.
Installation
Installation is performed in the reverse order of removal. The sensor should be clearly fixed.
Solar sensor
Air conditioning with automatic comfort control
Material based on data from the portal www.mercedesman.ru
Removal
1. Open the hood and remove the front spoiler grille, refer to Section Removal and installation the spoiler grille.
2. Disconnect the sensor connector under the front spoiler grille and detach the sensor from the holder.
Installation
Installation is performed in the reverse order of removal. The sensor should be clearly fixed.