Heater/Air Conditioner Fan Installation Details
1. The heater/air conditioner fan installation details are shown in the illustration to which all references in the text refer.
2. Remove the cover on the right under the instrument panel (1).
3. Unscrew the bolt (2) securing the fan assembly with the drive electric motor (M2).
4. Disconnect the electrical wiring from the drive motor.
5. Remove the fan assembly from the casing (3).
6. Installation is carried out in reverse order.
Resistive assembly
Heater/Air Conditioner Fan Resistive Assembly Installation Details
1 - Heater/Air Conditioner Evaporator Housing; 2 - Lid; 3 - Bolts; 4 - Electrical wiring connector; R14 - Fan pre-resistor group
1. The details of the resistive assembly installation are shown in the illustration, to which all references in the text refer.
Original can be found on the website: mercedesman
2. Remove the cover on the right under the instrument panel (2).
3. Disconnect the electrical wiring connector (4) of the resistive assembly (R14).
4. Loosen the mounting screws (1) and remove the resistive assembly (R14).
5. Installation is carried out in reverse order.