Removing
1. Raise the car.
2. Unscrew the 6 screws securing the cover (arrows) and remove the bottom cover.
Installation
1. Attach the cover and tighten with screws. At the same time, install the side part so that its edge is above the engine compartment trim.
2. Lower the car.
Cars with an anti-theft device
1. Before removing the engine cover, turn off the anti-theft safety device through the openings in the engine hood. Whether a protective device is installed, you can find out by the presence of the device pos. N26/2.
2. Unscrew or remove the high voltage wire (arrow).
3. After installing the engine compartment cover, connect the high voltage wire.