Contents: Removal ↡ Installation ↡
Removal
1. Turn off the radio. Speaker in the dashboard.
2. Use a plastic wedge to lift the protective cover of the right or left speaker.
3. Take out the speaker, disconnect the plug connection in the conducting line.
4. Disconnect the spring clips and remove the speaker from the protective housing.
Speaker in the space between the back of the rear seat and the rear window of the car
1. Remove the seat from the rear of the vehicle together with the backrest.
2. Remove the inner C-pillar trim.
3. Remove and disassemble the space between the rear seat back and the rear window of the car body.
4. Disconnect the plug connection (H4/7x1) (left) or (H4/8x1) (right) going to the speaker.
5. Remove the housing (94) from the trunk.
6. Remove the speaker. To do this, press the retaining tabs. If specially equipped with a noise suppression device, there are two speakers on both sides, which are removed in the same way.
Speakers in the front doors
1. Unscrew the screw (89). Remove the speaker protective cover (91).
2. Loosen the screws and remove the speaker, disconnect the plug connection (92) in the supply line.
Speakers in the rear doors
1. Remove the rear door trim.
2. Disconnect the plug connection (88) going to the speaker, unscrew the screws (87). Remove the speaker.
Installation
Installation is carried out in the reverse order of removal.