Contents: Removal ↡ Installation ↡
50. Control handle; 51. Incandescent lamp; 52. Nut; 53. Protective cover; 54. Headlight optical axis tilt angle regulator; 55. Plug connector; S. Light switch
Removal
1. Disconnect the ground wire from the battery terminal.
Attention! This will erase the radio's anti-theft code.
2. Remove the protective cover under the instrument panel.
3. Pull the control handle towards the light switch with your hand.
4. Pull out the incandescent lamp (51).
5. Unscrew the nut (52) and remove the protective cover (53).
6. Disconnect the headlight optical axis angle adjuster (54) from the spring clips.
7. Turn the light switch (S1) to the left and pull it out downwards. When installing, pay attention to the correct fit of the locking tabs.
Installation
Installation is carried out in the reverse order of removal.