1. Sheathing; 2. Hooks; 3. Retaining clips; 4. Plug-in clip; 5. Shelf for hats; 6. Bolt; 7. Detail of the seat belt attachment
Removing
1. Detach the edge protection in the pour area (1).
2. Wring out two hooks with a plastic clip (3) from the retaining clips.
3. Wring out the skin (1) from the rear upper retaining clips, for which press the trim towards the middle.
4. Remove trim (1) forward from insertion clamp (4) and reeds (arrows) in the hat rack. If it is necessary to dismantle the entire casing completely, additionally remove the rear bench.
5. Remove the bolt (6) from the detail of the rear seat belt attachment (7) and pull the strap out of the casing.
Installation
1. Lay the seat belt webbing and tighten the bolt in the seat belt fastener to 35 Nm.
2. Further installation occurs in the reverse order of removal.