Contents: Removal ↡ Installation ↡
1. Headrest; 2. Driver's seat; 3. Covering; 4. Seat belt fastening detail; 5, 6, 7. Bolts; 8. Covering; 12. Fixing finger
Removal
1. Move the seat all the way forward.
2. Remove the cover over the seat belt fastening part (4), unscrew the bolt (5) from the seat belt fastening part.
3. Remove 3 bolts (6 and 7) from both rear seat rails using an E12 star screwdriver.
4. Move the seats all the way back.
5. Remove the cover (8) forward on both sides by lifting the tab with a screwdriver.
6. Remove the two bolts on both front seat rails.
7. Disconnect the seat heater connector from the front seat cushion frame.
8. Remove the seat.
Installation
1. Install the seat. The locking pin (12) must enter the hole in the rear console.
2. Attach the seat heating connector.
3. Tighten the seat tyres front and rear to 50 Nm.
4. Tighten the bolt into the seat belt mounting part to a torque of 35 Km.
5. Install the coverings.