Contents: Removal ↡ Installation ↡
1,2. Screws; 3. Protective coating; 4. Switch bar; 5. Wire
Removal
1. Remove the radio.
2. Remove the screws (1 and 2). Pull the protective cover (3) from the bottom, lifting it to a horizontal position, and then move it upward.
3. Remove the switch bar (4) from the protective cover.
Attention! When installing, lay the wire (5) on the side in the wire channel (arrow).
4. Remove the protective coating.
Installation
Install in reverse order.
Article text obtained from the website mercedesman.ru