Contents: Removal ↡ Installation ↡
Removal
1. Turn the plastic clamp 90°, this will loosen it.
2. Remove the screws.
3. With the optional "steering wheel adjustment" equipment: detach the plastic handle (2) of the steering adjustment lever outwards.
4. Lower the cover down.
5. Remove the steering adjustment lever bracket screw. Remove the lower bearing bracket.
6. Remove the cover.
Installation
1. Insert the steering adjustment lever bracket and secure. Install the handle.
2. Install the cover and screw it in place.
3. Secure the cover at the front by turning the clamp.