Front bumper
1. Remove one bolt on each side securing the bumper on the side to the side elements.
2. Remove the two nuts and washers on each side of the front side of the bumper-to-chassis mount.
3. Push out the clips along the top edge of the bumper in front of the radiator.
4. Gently pull the bumper forward and remove it from the vehicle.
5. Install in reverse order.
Rear bumper
6. Operating from the luggage compartment, open the hatches in the decorative panels and unscrew the mounting bolts on each side (see fig. 16.6).
Pic. 16.6. Bolts of fastening of a rear bumper (A). An additional bolt can be installed (IN)
7. Gently pull the bumper back and remove it from the vehicle.
8. Installation is carried out in the reverse order.