1. The front and rear bumper are composed of a protective strip, a porous assembly, a decorative trim and a reinforcing element, assembled by a sandwich. Disassembly of both bumpers is carried out in the following order.
2. Loosen the side fixing screws on both sides at the ends
3. Push back the retaining strips in pairs, top and bottom, starting at the outside and working towards the center.
4. Remove protective strips and foam element.
5. Press the latches back and remove the decorative trim from the reinforcing element.
6. Press the latch back on the threaded holders on both sides while sliding the holder back to remove.
7. Turn away nuts and bolts of fastening of forward holders and remove holders.
8. Assembly is carried out in the reverse order.