Checking and adjusting the toe-in of the front wheels
4MATIC Models
Rear wheel drive models
Arrows - Centering the position of the steering wheel; 055 - Holding device; 055b - Fixing; 10 - Tie rod; 10f - Locknut; 030 - Strut
Adjustment of the camber and longitudinal inclination of the axis of rotation of the front wheels - is made using an eccentric bolt
Ruler for measuring the convergence of the front wheels
Beissbarth — № P860 000 883, № P 872
Matra — № 002 548 199 074
Bosch — № 2 688 190 000,
№ — 1 688 190 022
Camber adjustment is carried out by the front eccentric bolt 19, and the longitudinal angle of inclination of the axis of rotation of the wheel is adjusted by the rear eccentric bolt 20 on the lower arm.
Checking and adjusting the toe-in of the front wheels
1. Set the wheels to straight ahead using device 055.
2. Check the center position of the steering gear and steering wheel (arrows).
3. Install the ruler 030 between the inner surfaces of the front wheels. Check the front wheel alignment.
4. The toe-in is adjusted by turning the steering rods 10.
The convergence of the front wheels is given in Specifications.