Ruler for measuring the convergence of the front wheels
Beissbarth — № P860 000 883, № P 872
Matra — № 002 548 199 074
Bosch — № 2 688 190 000, № 1 688 190 022
Adjustment of the camber and longitudinal inclination of the axis of rotation of the front wheels is carried out using an eccentric bolt.
Checking and adjusting the front wheel alignment
Camber adjustment is carried out by a front eccentric bolt (19), and the longitudinal angle of inclination of the axis of rotation of the wheel is adjusted by the rear eccentric bolt (20) on the lower arm.
1. Set the wheels to the straight ahead position using the (055).
2. Check the center position of the steering gear and steering wheel (arrows).
3. Install the ruler (030) between the inner surfaces of the front wheels. Check the front wheel alignment.
4. Adjustment of convergence is carried out by rotating the steering rods (10).
Front wheel alignment is given in Specifications.