Contents: Disc brakes ↡ Drum parking brake mechanisms ↡
Removal and installation front brake pads
Removal and installation rear brake pads
Parking brake sensor
Disc brakes
Refer to the illustration.
Drum parking brake mechanisms
Removal
1. Remove the rear wheels.
2. Remove the rear brake discs.
3. Remove the exhaust heat shield.
4. Tighten the automatic adjuster. Turn the eccentric pin g counterclockwise (about 1/2 turn), using the key, and move it back a little in the longitudinal direction so that the eccentric b is locked in the spring ring d with the protrusion h.
Original published on the website: MercedesMAN
5. Disconnect the return spring 111 using lever 041.
6. Unhook spring 107 using lever 040.
7. Remove brake shoes 103 from drive shaft flanges 68.
8. Disconnect return spring 112.
Installation
Installation is carried out in the reverse order of removal.