Removing
Details of installation of a cover of a head of the block of cylinders
1. Remove the inlet pipeline.
2. Remove the fan clutch.
3. Remove covers (14), (15) And (16) from distributor (6).
4. Detach the tips (2) spark plugs.
5. Unscrew the niche (3) under the spark plugs from the cylinder head covers.
6. Unscrew the distributor (6) and retainer (6a) left.
7. Remove the camshaft position sensor.
8. Remove a niche (3) with distributor (6) and spark plug tips.
9. Remove ignition coils.
10. Disconnect the crankcase ventilation tubes from the retainers on the cylinder head covers.
11. Unscrew the guide tube (7) oil level indicator from the right cylinder head cover.
12. Turn away bolts (9) with gaskets (10) or seals (10).
13. Remove cylinder head covers (4) And (5) along with gaskets (11) And (12) and seals 13.
Installation
Installation is made in an order, the return to removal.