Contents: Removal ↡ Installation ↡
Removal
1. Disconnect the damper shock absorber (46) from the middle steering rod (11).
2. Holding the axle bolt, loosen the nuts securing the middle rod to the steering knuckle and the pendulum arm. Using the drift (051) No.140 589 0063 00 and the puller (053) No.140 589 00 33 00, separate the rod (11) from the knuckle and arm.
Installation
1. Installation is carried out in the reverse order. Check the reliability of the attachment of the ball joints of the longitudinal arm. Replace the self-locking fasteners (tightens with a force of 50 Nm). When connecting to the shock absorber rod, tighten the fasteners with a force of 40 Nm.
Article obtained from this portal (MercedesMAN)
2. Check the front wheel alignment angles and make appropriate adjustments if necessary.