Note on safety precautions
The operation of lifting and installing the car on stands is associated with danger! Therefore, before carrying out the operation, read the Section Jacking and towing Introduction to the manual.
Petrol engines
Removal
1. Raise and support the vehicle on stands.
2. Unscrew the mounting bolts (arrows in the illustration) and remove the front bottom cover.
3. Unscrew the mounting bolts (arrows in the illustration) and remove the rear bottom cover.
Installation
Installation is performed in the reverse order of removal.
Information copied from the website www.MercedesMan.ru
Diesel engines
Removal
1. Raise and support the vehicle on stands.
2. Unscrew 6 bolts (arrows in the illustration) fasteners and remove the front cover (1) downwards.
3. Unscrew the 6 mounting bolts and remove the rear cover (2) downwards.
Installation
1. Install the rear cover first, then the front cover, securing them with bolts.
2. Lower the car onto its wheels.