Contents: Engine 112 ↡ Diesel engines ↡
Air filter. Engine 111 – version 1
1 - Upper part of the air filter; 2 - Filter element; 3 - Holder; 4 - Rubber support; 5 - Lower part of the air filter
Air filter. Engine 111 – version 2
1 - Pressure pulsation damper; 2 - Circulation flap drive; 3 - Damper; 4 - Holder; 5 - Upper part of the air filter; 6 - Filter element; 7 - Lower air filter part
Air filter. Engine 112
1 - Right hose; 2 - Lower air filter part, right; 3 - Lower air filter part, left; 4 - Upper air filter part and upper engine cover; 5 - Left hose; 6 - Filter element
Air filter. Diesel engines
1 - Filter element; 2 - Air suction hose; 3 - Holder; 4 - Upper part of the air filter; 5 - Air mass meter; 6 - Drain pipe, for removing water from the filter; 7 - Connecting hose, between air intake and pressure pulsation damper; 8 - Lower air filter part; 9 - Screen
Attention! Please also refer to Section Replacing the engine air filter element.
Engine 112
Removal
1. Remove the upper engine trim at both air cleaner boxes and at the bracket.
2. Remove the left and right corrugated hoses.
3. Remove the lower part of the filter from the cylinder head covers.
4. Release the intake pipe at the throttle actuator.
5. Remove the lower part of the air filter with the intake pipe from the engine.
Installation
1. Install the lower part of the air filter with the suction pipe.
2. Install the suction pipe to the throttle actuator and secure it.
Caution! Pre-lubricate the actuator seal with a thin layer of grease.
3. Apply a thin layer of grease to the rubber elements on the cylinder head covers. Press the lower part of the air filter into the supports.
4. Install the hoses.
5. Install the upper engine cover and both upper air cleaner sections.
Diesel engines
Removal
1. Remove the top engine cover, refer to Section Removal and installation the top engine cover.
2. Disconnect the air mass meter connector.
3. Disconnect the air intake hose from the air filter.
4. Disconnect the connecting hose at the pulsation damper.
5. Remove the upper part of the air filter.
6. Remove the filter element.
7. Remove the lower part of the air filter, paying attention to the position of the washers on the engine side.
Installation
Installation is performed in the reverse order of removal.