1. Check the installation position of the glass when it is slightly opened. The gap from above must be uniform, from below the glass must enter the guide rail, otherwise adjust.
2. Remove an internal covering of a door.
3. Carefully peel off the sealing film in the lower area.
Attention! The film breaks easily.
4. Lower the glass of the door window while the bolt is in the mounting hole. Loosen the bolt without unscrewing it.
5. Insert the glass from above into the rear window rail, at the same time adjust the glass down or up, tighten the bolt.
6. Using the handle, lowering and raising the glass, check the ease of its movement.
7. Attach the sealing film without wrinkling. Attention: the film must not be damaged and must ensure perfect tightness.
8. Install the inner door trim.