Removing
1. Remove the steering wheel.
2. Remove the bottom cover of the panel of devices.
3. Disconnect the wiring connector from the signal or airbag contact spring A45x1.
4. Disconnect the A45x2 contact spring relay wiring connector.
5. Turn away bolts of fastening 32h of the contact coil A45.
6. Carefully remove coil A45 from the pipe.
7. Make sure that the retaining ring 70h is installed correctly.
Examination
1. Check distance «b» between retaining ring 70h and bracket 85.
2. Check contact coil A45 for damage.
Installation
Installation is carried out in the reverse order of removal.