Removing
Details of installation of the gear selector lever (with mode switch W/S)
39 - Gasket; 40 - Bolts (4 pieces); 97 - Intermediate lever; S16 / 10 - Sensor-switch of the selector position; S16 / 10s2 - Switch for reversing lights; Y66/1 - Solenoid actuator for locking positions «R/P»
1. Remove shift lever from intermediate lever (97).
2. Remove the center console.
3. Remove the bolts (40).
4. Disconnect the connectors and the electromagnetic actuator of the locking positions «R/P» (Y66/1) from the identification switch (S16/10), reversing light switch (S16/10s2).
5. Remove the gear selector lever assembly from the floor.
Installation
Installation is carried out in the reverse order of removal. Check for proper installation and condition of the gasket (39), replace if necessary.