Removing
Removal and installation of brake pads on models from 01.11.93, issue.
Removal and installation of brake pads on models up to 10/31/93, issue.
1. Remove rear wheels.
2. Remove the brake discs of the rear wheels.
3. Remove the exhaust system heat shield.
4. Tighten the automatic adjuster. Turn the eccentric pin (g) counterclock-wise (about 1/2 turn), using a wrench, and move it back for a while in the longitudinal direction so that the eccentric (b) stuck in spring ring (d) with ledge (h) .
5. Disconnect the return spring (111) with a lever (041).
6. Unhook the spring (107) with a lever (040).
7. Remove the brake pads (103) from drive shaft flanges (68).
8. Disconnect the return spring (112).
Installation
Installation is carried out in the reverse order of removal.