Models before 01.11.93
Adjusting the parking brake on models 140 up to 10/31/93.
1. Raise the rear of the vehicle.
2. Remove one bolt on each rear wheel.
3. Using a screwdriver (3 mm), turn the adjusting bolt "b" of the adjuster (105) clockwise until the rear wheel is locked.
4. Turn the adjusting bolt (b) back approximately 5 - 5.5 turns so that the wheel can rotate freely.
5. Press the parking brake pedal several times.
6. Tighten the wheel bolts and lower the vehicle.
Models from 01.11.93.
Adjusting the parking brake on models 140 before 11/01/93.
1. Raise the rear of the vehicle.
2. Remove one bolt on each rear wheel.
3. Using a screwdriver (4.5 mm), turn the adjusting wheel (105) so that the brake pads lock the wheel.
4. Turn the adjusting wheel (105) back so that the wheel can rotate freely (approximately 5-6 teeth).