Individual characteristics are also given in the text of the Chapter and, if their implementation is mandatory, are highlighted in bold.
| General parameters | |
| Type | 5-speed automatic with electronic gear shift control or 6-speed automated transmission "Sequentronic" |
| Designation | 722.6 (W5A 330/580) or 716.6 respectively |
| Liquid used 7.0 l, MB No.001 989 21 03 10 9.0 l, MB No.001 989 21 03 10 For diagnostic codes of the electronic control system of automatic transmission, see Chapter Engine electrical equipment. Gear ratios and activation of activators AT 722.6  | |
* Shift activators in kick-down mode only | |
| Main gear | 3.06: 1 (3.27: 1) |
Rear Engine/Gearbox Mounts | |
| Bolts (2) | 25 |
| Bolts (3) cross member rear to body | 40 |
| Bolt or nut securing the engine mount to the gearbox | 50 |
Nuts of the cardan shaft flange to the gearbox: | |
| M10 | 40 |
| M12 | 60 |
| 716.6 | |
Cable harness for manual transmission | |
| 15 |
| 10 |
| Steering Angle Sensor Connector Holder | 10 |
| Central connector holder | 10 |
| Mass point at the checkpoint | 10 |
| Gearbox oil drain plug | 60 |
| Gearbox oil filler plug | 50 |
| Battery clamp at the gearbox housing | 15 |
| Angle sensor mounting bolt to sensor bar | 3 |
| Ventilation housing at the gearbox | 6 |
Hydraulic unit at the gearbox | |
| 7.5 |
| 9.5 |
| Pump to gearbox housing | 7.5 |
| Angle piece for gearbox housing | 3 |
| Reservoir for gearbox housing | 9.5 |
| Bridge of the central block of gear shift to the bottom | 23 |
| Reversing light switch to gearbox housing | 10 |
| Sensor board to gearbox housing | 3 |
| Locking plate for gearbox | 9 |
| Connecting sleeve to the central axis of gear shifting | 11.5 |
| Clutch Release Lever Movement Sensor | 3 |
722.6 | |
| Oil plug AT | 20 |
| Oil plug of the torque converter AT | 16 |
| AT pan bolts | 8 |
| AT selector rod lock screw | 12 |
| Bolt for fastening the torque converter to the drive disk M8 | 42 |
| Drain plug in the transmission pan | 20 |
| Nut for fastening the cardan shaft to the gearbox M12 | 60 |
| Bolt securing the electromagnetic valve to the gear shift plate | 8 |
| Bolt for fastening valve body cover to valve body M6x30 | 8 |
| Bolt for fastening the side cover to the valve body cover and valve body M4x12 | 4 |
| Bolt for fastening the transmission housing to the torque converter housing | 20 |
| Bolt for fastening the pan to the transmission housing 8 | |
| Output shaft flange fastening nut | 200 |
| Bolt for fastening the electrohydraulic control unit to the transmission housing | 8 |
| Bolt for fastening the multi-disc brake B2 to the transmission housing | 16 |
| Bolt securing the pawl to the gear selector lever | 8 |
| Torque converter drain plug | 16 |
[Article was obtained from the portal www.mercedesman.ru]