Overall dimensions of the Sedan model
Overall dimensions of the Coupe model
Overall dimensions of the Universal model
The body is self-supporting, with a rigid life-saving frame, front and rear zones of directed energy-absorbing deformation. In-door and side reinforcements are used to protect against side collisions. | |
The bottom and wheel wells are covered with durable protective mastic. | |
Side airbags above the side windows and in all doors | |
The body pillars are designated in the text of the Manual from front to rear as A, B and C. | |
Overall dimensions of the car, mm | |
Length/Width/Height/Base/Track (in brackets - back) wheels | |
Sedan | 4526/1728/1426/2715/1505(1476) |
| C32AMG | 4528/1728/1400/2715/1493(1478) |
| Coupe | 4443/1728/1406/2715/– |
The car is loaded with a driver and two passengers (3 x 68 kg) | |
| 1) Without license plate cover | |
| 2) Petrol models | |
| 3) Diesel models | |
| 4) With a trailer hitch | |
| Minimum turning diameter, m | 10.76 |
| Maximum load on trailer towbar | 75 |
| Maximum roof load, kg | 100 |
| Maximum load in trunk, kg | 100 |
| Trunk capacity, l | 430 (Coupe 500) |
Gaps between body elements, mm | |
| Hood to wing | 3.5 ±1.0 |
| Hood to headlight | 4.0 ±0.5 |
| Hood to bumper (sports Coupe) | 5 |
| Wing to the front door | 3.5 ±0.5 |
| Front door to A-pillar | 6.5 – 7.5 |
| Front door to back | 4.0 ±0.5 |
| Rear door to the roof | 6.5 – 7.5 |
| Rear Door to C-Pillar (Model "T") | 6.0 – 7.0 |
| Rear door to side panel below | 3.5 – 4.5 |
| Trunk lid to wing | 3.5 ±1 |
| Trunk lid to tail light | 4.0 ±1 |
Station wagon (Model "T") | |
| Tailgate to roof | 6.5 ±1.0//8.5 – 9.5 |
| Tailgate to D-pillar | 3.5 |
| Tailgate to tail light | 4.0//4.0 ±1 |
| Tailgate to bumper | 5.5//6.5 – 5.0 |
Sports Coupe | |
| Tailgate to roof | 8.5 – 9.5 |
| Tailgate to tail light | 4.0 ±1.0 |
| Tailgate to wing | 3.5 ±1.0 |
| Tailgate to bumper | 6.5 – 5.0 |
Pressure, mBar//plunger travel, mm of headlight vacuum regulator | |
| Position 0 | 400 ±30 // 0 |
| Position 1 | 290 ±30 // 0.95 |
| Position 2 | 200 ±30 // 1.7 |
| Position 3 | 50 ±30 // 3.0 |
Tightening force of threaded connections, Nm | |
Tightening torques for fasteners are also given in the text of the Chapter and in some illustrations*. | |
*Tightening torques highlighted in bold in the text must be strictly observed; efforts not shown in bold are only approximate. | |
| Door hinge bolts | 32 |
| Door lock retainer bolts | 28 |
| Rear Seat Hinge Nuts | 40 |
| Rear Seat Hinge Outer Pin Bolts | 23 |
| Seat belt buckle bolt | 30 |
| Rear seat and seat belt nuts | 20 |
| Wheel bolts | 110 |
[Original article is on the portal: Mercedesman.ru]