Body
Serial designation | 463 |
Design | The body is located on a curved ladder frame with increased torsional rigidity, bolted to the frame on rubber mounts |
Bottom and wheel arches | Covered with durable protective mastic |
Designation in the text of the Body Pillar Manual (front to back) | A, B and C |
Weight and size characteristics of the car, mm
See Specifications.
Doors
Landing gaps of side doors in body openings, mm | 0.5 ± 1 |
The amount of protrusion of the tailgate above the surfaces of the pillars * | 0 ÷ 1.5 |
Distance between the head of the fixing bolt and the seating plane of the outer handle of the side door (A) (see illustrations Details of installation of the outer handle of the front door and Rear Door Outside Handle Installation Details), mm | 45 |
* Measured 30mm below the top edge, 30mm below the stiffener and 150mm above the bottom edge
Drawbar Mounting Dimensions
See Specifications.
Tightening force of threaded connections, Nm
Nuts of fastening of levers of screen wipers | |
| 16 |
| 15 |
Nuts for fastening the spindles of the front wipers on the rear bulkhead of the engine compartment | 23 |
Bolts of fastening of a cross beam of fastening of a radiator on the front end of the car | 19 |
Bolts of fastening of a latch of the lock of a cowl | 8 |
Fastening of spherical support of a door of a back | 20 |
Bolts of fastening of a latch of the lock of a door of a back | 9 |
Instrument panel mounting bracket bolts | 20 |
Bolts/nuts of fastening of directing brackets of seat belts | 35 |
Seat belt anchor bolts | 35 |
Seat belt buckle bolts | 35 |
Bolts/nuts of fastening of returnable drums of seat belts | |
| 35 |
| 25 |
Seat-to-sled mounting bolts | 60 |
Seat back bolts | 35 |
Bolts of fastening of the console of a forward seat to a floor | 62.5 |