Front doors
Details of installation of the outer handle of the front door
1 - Insulating film; 2, 3 - Bolts; 4 - Handle; 5, 6 - Sealing elements; A - Control dimension
1. Remove the bolt (3) handle attachment (4) to the lock assembly.
2. Remove interior padding and insulation film (1) (see Section Removal and installation of an internal upholstery of door assemblies), - the damaged film must be replaced.
3. Turn out a fixing bolt (2) and remove the door handle (4), - if necessary, prepare replacement sealing elements (5 and 6).
4. Installation is in reverse order - pre-adjust the size (A) between the contact surface of the handle and the actuating bolt of the door lock.
Rear doors
Details of installation of the outer handle of the rear door
1, 2 - Bolts; 3 - Handle; 4, 5 - Sealing elements; A - Control dimension
1. Remove the interior upholstery panel (see Section Removal and installation of an internal upholstery of door assemblies).
2. Remove the bolts (1 and 2) and remove the handle.
3. Installation is in reverse order - do not forget to adjust the control dimension (A) (see paragraph 4 above).
Tailgate
The procedure is the same as described above for the rear door.