Removing
1. Open the hood.
2. Disconnect the negative cable (-) battery with the ignition off. The cabin air filter box must first be removed.
Attention! Before disconnecting the cable, find out the security code of the radio, if any, refer to Section Replacing the battery.
3. Remove the front spoiler grille from the hood, refer to Section Removal and installation of the spoiler grille.
4. Disconnect the connector (1) at the jet heater (2).
5. Pull out the connecting element (3) jet water hose (4).
6. Disconnect and remove the jet with a screwdriver from the holder.
Installation
1. Insert the jet into the spoiler grille and fix it.
2. Put the connecting element on the jet.
3. Dock the nozzle heating connector.
4. Install the spoiler grille, refer to Section Removal and installation of the spoiler grille.
5. Connect ground cable (-) battery with the ignition off. Install the cabin air filter box. If necessary, enter the radio code and set the time on the clock.
6. Close the hood.
7. Check the performance of the jet and adjust it, refer to the appropriate section.
Adjustment
See accompanying illustration.