Removal and installation the gear selector lever (Mercedes-Benz S-Class W220)

9 - Gasket; 40 - Bolts (4 pieces); 97 - Intermediate lever; S16/10 - Gear identification switch; S16/10s2 - Reversing light switch; Y66/1 - Electromagnetic actuator for locking the "R/P" positions

Removal

1. Remove the shift lever from the intermediate lever 97.

2. Remove the center console.

3. Unscrew bolts 40.

4. Disconnect the connectors and the electromagnetic drive of the R/P position lock Y66/1 from the identification switch S16/10, the reversing light switch S16/10S2.

5. Remove the gear selector lever assembly from the floor.

Installation

Installation is carried out in the reverse order of removal. Check the correct installation of gasket 39 and its condition, replace it if necessary.

[Material taken from a web resource mercedesman.ru]

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The article has been verified: Khromov Roman Mikhailovich

Share with friends:

◀ Previous

S-Class W220 / Automatic gearbox

Next ▶

Parking Lock Mechanism — Removal and Installation
Disassembly and assembly of the K3 clutch
Disassembly and assembly of the drive shaft with clutch K2 and front block of planetary gears
Disassembly and assembly of the K1 clutch
Removal and installation of multi-plate clutches K1, K2 and K3

More similar articles for repairing other models