Removing
combination switch
1. Disconnect the negative cable from the battery.
2. If an airbag is installed, remove the bolt (1) and remove the plate (2).
3. Remove the bolts (3).
4. Disconnect the wiring connector (S4x1) from the combination switch - to do this, press the rack (arrow).
5. If equipped, disconnect the tempostat wiring connector (S40x1).
6. Remove the pipe (4).
7. Remove the tempostat switch (S40) from a pipe (4).
8. Remove the combination switch (S4) from a pipe (4).
Installation
Installation is carried out in the reverse order of removal.