Instrument cluster installation details
1, 3 - Bolts; 2 - Plate; 4 - Pipe; S4 - Combined switch.; Version A - Ribs for extracting the instrument panel are at the front; Version B - Ribs for extracting the instrument panel are at the rear
In version «IN» an identification rib is provided in the middle (arrow)
Removing
1. Remove the steering wheel, contact coil spring and steering angle sensor.
2. Insert hooks (8 mm) on both sides between the instrument panel and the instrument panel and turn them 90°inwards towards the instrument panel.
3. Remove the instrument panel on both sides by about 8 mm using the hooks. Then remove the instrument panel completely by turning the hooks 120°.
Installation
Installation is carried out in the reverse order of removal.