Contents: Clutch slave disc ↡ Clutch release sleeve ↡
Clutch housing assembly No
- model 280/280 SE — 001 250 4204
- model 350 SE/450 SE - 002 250 2204
Information on the dimensions of the clutch parts for repair is not provided, since repair of the clutch housing with a diaphragm spring can only be performed in a specialized workshop.
Clutch slave disc
Clutch release sleeve
The gap between the clutch housing and the guide pipe of the front cover of the gearbox is 0.05 - 0.17 mm
The clutch housing and bearing are a single unit, so when replacing the clutch release sleeve, it is changed as an assembly. The clutch release sleeve is constantly pressed against the pressure ring of the clutch spring with a force of 4 kgf and the bearing rotates together with the clutch.
- Master cylinder diameter - 19.05 mm
- Working cylinder diameter - 23.81 mm
Axial clearance between the pusher and the piston of the master cylinder - 0.2
(Original source of information: www.mercedesman.ru)