Contents: Removal ↡ Installation ↡
Removal
1. Mark the position of the front wheel in relation to the hub with paint. This will allow the balanced wheel to be mounted in the same position. Loosen the wheel bolts with the car on the ground. Raise the front of the car and remove the front wheel.
2. Loosen the plastic nuts and bolts at the marked locations and remove the inner wing.
3. Loosen the nuts and bolts on the front air duct and remove the parts.
Installation
1. Check the sealing rubber for strength of installation and damage, replace if necessary.
2. Install and bolt the parts. If necessary, when adjusting the part, look at the niche of the other front wheel to see how the parts should be positioned.
Read more on the website MERCEDESMAN
3. Install the front wheel so that the markings applied during removal match. Screw the wheel on. Lower the car and tighten the wheel bolts crosswise to a torque of 110 Nm.