Removing
1. Tilt the outside mirror back. To keep the mirror in this position, you need to insert a suitable piece of wood 35 mm long. This will greatly facilitate the removal and installation.
2. Remove the three screws securing the mirror leg while holding the mirror so that it does not fall out.
3. Remove the mirror, disconnect the mirror adjustment wire.
4. If you need to replace the mirror glass, disconnect and remove the mirror housing. Detach the mirror glass retaining spring upwards and remove the mirror.
Attention! Do not press the mirror glass forward out of the housing.
Installation
1. Collect the mirror.
2. Connect the electric mirror drive, install the mirror and secure. Remove the wooden rod.