Removing
6. Take away an external mirror forward if to look in a direction of the movement.
7. Pull the top of the mirror glass back. To do this, turn on the ignition, lower the mirror all the way down and turn off the ignition.
8. Press the retaining spring 1 up with a screwdriver and pull it out from under the ledge 2 (see illustration).
9. Remove the mirror glass from the base plate.
10. Disconnect plugs 3 (see illustration).
Installation
11. Install the mirror glass on the base plate, sliding it from the bottom up, retracting the thrust springs 5 to the back side of the plate, and the grips 6 to the receivers 7 (see illustration 45.10).
12. Insert the ends of the retaining spring over the retaining tabs on the base plate.
13. Move the outside mirror to its original position and adjust the clearance.