Front brakes
Disc diameter - 262.0 mm
Disc Thickness:
Models with 2.0 liter naturally aspirated petrol and diesel engines:
- New - 110 mm
- Minimum (before renovation) - 9.5 mm
- Minimum (limit) - 9.0 mm
Models with 2.3 liter and 2.6 liter turbocharged petrol and diesel engines:
- New - 22.0 mm
- Minimum (before renovation) - 20.4 mm
- Minimum (limit) - 19.4 mm
Maximum disc runout - 0.12 mm
The minimum thickness of the friction material of the brake pad is 20 mm
Pad wear indicator turns on at - 3.5 mm
Cylinder bore diameter - 54.0 mm
Rear pads
Disc diameter - 258.0 mm
Disc Thickness:
- New - 9.0 mm
- Minimum (before renovation) - 7.6 mm
- Minimum (limit) - 7.3 mm
Maximum disc runout - 0.15 mm
The minimum thickness of the friction material of the brake pad is 2.0 mm
Pad wear indicator turns on at - 2.5 mm
Cylinder bore diameter - 34.98 to 35.03 m
Parking brake
Shoe type with cable drive with a drum installed in the rear hub disc
Parking brake drum diameter - 164±0.2 mm
Brake pad friction material thickness:
- New - 2.65mm
- Minimum - 1.00 mm
Master cylinder
Cylinder bore diameter:
Primary Circuit:
- Models with 2.6 liter petrol engines - 23.81 mm
- All other models - 22.22 mm
Secondary Circuit:
- Models with 2.6 liter petrol engines - 19.05 mm
- All other models - 17.46 mm
Connection tightening torque, Nm
ABS wheel sensor mounting bolts:
- Front sensor - 22
- Rear sensor - 8
Brake disc mounting screws - 10
Brake hose fittings:
- Caliper fitting - 18
- All other fittings - 15
Caliper air release valve - 7
Front brake caliper:
- Guide pin bolts - 35
- Support bracket bolts - 115
Nuts of fastening of the main cylinder — 20
Bolts of fastening of a support of a back brake — 110
Servo amplifier mounting nuts - 15
Nut of the union of a vacuum hose of the servo amplifier — 30