Contents: Removal ↡ Installation ↡
Removal
1. Disconnect the negative battery terminal.
2. Pry up the glove box light, disconnect the wires and remove the light (see fig. 41.2).
Fig. 41.2. Remove the glove box light
3. Loosen the two mounting screws and remove the bracket (see fig. 41.3).
Fig. 41.3. Loosen the bracket mounting screws
4. Remove the rivets by prying the expanders with a screwdriver, then remove the rivet bodies (see fig. 41.4. a-c).
Fig. 41.4, a. Pry up the rivet expander
Fig. 41.4, b....then remove it...
Fig. 41.4, c....and the rivet body
5. Remove the glove box, pull the lamp wire through the hole and remove the box from the instrument panel (see fig. 41.5).
(Original published on the website: «MercedesMan.ru»)
Fig. 41.5. Removing wires when removing the box
Installation
6. Installation is carried out in reverse order.