Driver's seat
1. Move the seat back and set the height adjuster to the lowest position.
2. Remove the two screws on the front mounting of the guide rail to the floor (see fig. 35.2).
Pic. 35.2. Loosen the front guide rail bolts...
3. Move the seat forward and set the height adjuster to the highest position.
4. Remove the two bolts at the back securing the guide rails to the floor (see fig. 35.4).
Pic. 35.4. and rear guide rail bolts
5. Raise the seat slightly and pull it forward out of the sliding rail.
6. Installation is carried out in the reverse order.
Passenger seat
7. Move the seat to the opposite side and unscrew both front bolts of the guide rail.
8. Move the seat forward and remove the covers on the rear rail.
9. Remove the rear guide rail mounting bolts, then pull the seat forward.
10. Installation is carried out in the reverse order.