Separate characteristics are also given in the text of the Chapter and, if they are mandatory, are highlighted in bold.
Common parameters | |
Type | 6 speed |
Designation | 716.601/620/622/623/640/641 Main gear 3.46 |
Tightening force of threaded connections, Nm | |
Fastener tightening torques are also given in the text of the Chapter and in some illustrations *. | |
*The tightening torques in bold type are subject to exact observance; Efforts not in bold are indicative only | |
Rear engine/transmission mounts | |
bolts (2) | 25 |
bolts (3) rear crossbars to the body | 40 |
Bolt or nut securing engine mount to gearbox | 50 |
Nuts of the cardan shaft flange to the manual transmission: | |
| 40 |
| 60 |
Cable harness for manual transmission | |
| 15 |
| 10 |
Clutch pipe holder | 9.5 |
Clutch line to slave cylinder | 16 |
Mass point on manual transmission | 10 |
Manual transmission oil removal plug | 60 |
Oil fill plug | 50 |
Battery clamp at the gearbox crankcase | 15 |
Ventilation housing at manual transmission | 6 |
Elbow to gearbox housing | 3 |
The bridge of the central block of a gear change to the bottom | 23 |
Reversing lamp switch to manual transmission housing | 10 |
Sensor board to the gearbox crankcase | 3 |
Locking plate for manual transmission | 9 |
Connecting sleeve to the central axis of gear shifting | 11.5 |
Displacement sensor to clutch release lever | 3 |
Clutch Release Lever | |
to the RKPP | 9 |
to clutch cover | 8 |