Air mass meter and intake manifold
1 - Air intake; 2 - Connecting element; 3 - Throttle actuator; 4 - Damper; 5 - Flange of the inlet pipeline; 6 - Gasket; 7 - Air mass meter; 8 - Air hose; 9 - Air channel; 10 - Seal; 11 — the Inlet pipeline
6-cylinder petrol engine 112
Removing
1. Remove the air filter housing from the cylinder head cover vertically upwards.
2. Disconnect the air mass meter connector.
3. Remove the ventilation hose from the meter and disconnect from the holder.
4. Release the upper retainer of the air mass meter.
5. Pull the hook on the upper latch on the air intake pipe. Thus, push the weight meter back far enough that the latch can no longer be locked.
6. Press the latch on the air intake duct downwards with a screwdriver.
7. Remove the air mass meter from the intake manifold.
Installation
1. Installation is carried out in the reverse order of removal.
2. Visually check the O-rings of the mass meter for damage, replace if necessary.
3. Before installing the air filter housing, lubricate with a thin layer of grease, such as «NaphtolenH» rubber elements on the cylinder head covers and the o-ring of the meter.