1. Locking bracket (clamp); 2. Housing cover; 3. Plug for low beam; 4. Plug for high beam; 5. Parking light bulb socket; 6. Plug for anti-theft light; 7. Low beam incandescent lamp; 8. High beam bulb; 9. Parking light bulb; 10. Incandescent fog light bulb; 11. Low beam lamp clip; 12. High beam lamp clip; 13. Fog light bulb clip
Attention! Turn off the switch of the corresponding lamp.
1. Open the engine hood.
2. Fold the wire clip (1) outward and remove the housings (2).
3. Remove the plug connector from the corresponding lamp.
4. Low beam, high beam and fog lamps: unhook the clips and remove the lamp. Insert the new lamp so that the protrusions fit into the corresponding cutouts in the housing. Insert the fog lamp lamp together with the wire going into the car.
5. Parking light (sidelight): remove the bulb holder together with the bulb. Remove the bulb from the holder and replace it. When inserting, lock the bulb holder.
6. Place the protective cover on and secure the support bracket.