Removing
1. Turn off the fan.
2. Remove the cover under the glove box in the co-driver's footwell. To do this, unscrew the front Phillips screw, turn the plastic spring clip 1/4 turn on the side of the footwell outlet nozzle and remove. After inserting your fingers into the holes in the cover, remove it in the direction of the driver's seat.
3. Unlock the fan motor casing.
4. Disconnect the wire connector and unscrew the fan motor (A32m1).
Installation
1. Check the installed fan impeller for ease of rotation. Remove foreign bodies that accidentally got there from the air channel.
2. Install the motor and screw on.
3. Put on the wire connector.
4. Install the shell in the reverse order of removal.