Installation details of the front suspension trailing arm
1 - Trailing arm
2 - Frame
3 - Bridge
4 - Anti-roll bar
5 — Connecting draft of a steering drive
6 - Castellated nut
The scheme of fastening the steering damper to the connecting rod
7 - Nut
1. Loosen the nut (7) fastening the steering damper to the connecting rod.
2. Unbolt the trailing arm (1) from the bridge (3).
3. Unscrew from the lever (1) the bar of the stabilizer bar (4) (see Section Removal and installation of the front anti-roll bar).
4. Remove cotter pin and loosen castle nut (6) tie rod mountings (5) to the swing arm.
5. Press out the rod (5) from the rotary lever.
6. Remove trailing arm (1).
7. Installation is carried out in the reverse order.