Details of the installation of the bearing assembly of the transfer case
1 — Retaining ring
2 - Bearing assembly
Arrow - Direction of rotation when removing the circlip
1. Details of the installation of the bearing assembly of the transfer case are shown in the illustration, to which all references in the text refer.
2. Remove the planetary gear assembly (see Section Removal and installation of the assembly of the planetary gearbox of the center differential of the transfer case).
3. Turning in the direction of the arrow, remove the retaining ring (1).
4. Pull up to remove the bearing assembly with retainer (2).
5. Rinse all components thoroughly, wipe with chamois leather and dry with compressed air.
6. Installation is carried out in the reverse order.
7. Finally, check the transfer case for signs of leak development.