Removal and installation the differential lock drive vacuum pump (Mercedes-Benz G-Class W463)

Installation details of the differential lock drive vacuum pump
1 - Vacuum hose; 2 - Vacuum connector; 3 - Fastening nuts; M40 - Vacuum pump

1. Disconnect the vacuum hoses (1) from the pump assembly (M40).

2. Disconnect the vacuum connector (2).

3. Loosen the fastening nuts (3) and remove the pump (M40).

[Original published on the website MERCEDESMAN.ru]

4. Installation is carried out in reverse order.

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The article has been verified: Polyakov Zakhar Grigorievich

Share with friends:

◀ Previous

G-Class W463 / Transfer case

Next ▶

Removal and installation the vacuum receiver of the differential lock control system
Removal and installation the transfer case control module
Changing the oil in the transfer case
Bleeding air from the hydraulic circuit of the differential lock drive
Lubrication of cardan shaft hinge joints and sliding joints

Removal and installation the transfer case servomotor
Disconnecting and connecting cardan shafts on the transfer case
Removal and installation the transfer case
Removal and installation transfer case suspension supports
Transfer case design

More similar articles for repairing other models